United States
Acinterlab
Welcome to Acinterlab
0 Items $0.00 Cart

You have no items in your shopping cart.

Return to Previous Page

ED 23 DRYING OVEN WITH NATURAL CONVECTION Cat No. 9010-0190 - Binder

Be the first to review this product

$1,440.00

Routine drying and sterilization applications up to 300 °C (572 °F) and storage at precisely controlled elevated temperatures are the strengths of ED drying ovens. Because of the natural convection with a high rate of air exchange, thermal processes run with significantly increased efficiency.


Brand: Binder 
Part# 9010-0190


Shipped directly from supplier.


Binder Coupons


Once you get your coupon, come back to us with your coupon confirmation.

Details

-Electronically controlled APT.line™ preheating chamber assuring temperature accuracy and reproducible results
-Temperature range 5 °C (32 ºF) above ambient temperature up to 300 °C (572 °F)
-Digital temperature setting with an accuracy of one degree
-DS controller with integrated timer 0 to 99 h
-Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
-Adjustable front ventilation flap slide and rear exhaust ø 50 mm (1.97 inch)
-With or without RS 422 Interface for use with optional GMP/GLP and FDA guideline 21 CFR Part 11 compliant APT-COM™ DataControlSystem software
-Units up to 115 liters are stackable
-2 chrome-plated racks included
-BINDER test certificate

 

ED 23

Exterior dimensions

 

Width (mm/inch)

433 / 17.1

Height (inclusive feet/castors) (mm/inch)

492 / 19.4

Depth (mm/inch)

516 / 20.3

plus door handle, I-panel and exhaust duct (mm/inch)

85 / 3.4

Wall clearance rear (mm/inch)

100 / 3.9

Wall clearance side (mm/inch)

100 / 3.9

Exhaust duct outer-Ø (mm/inch)

52 / 2.1

Steam space volume (l/cu.ft.)

36 / 1.3

Number of doors

1

Interior dimensions

 

Width (mm/inch)

222 / 8.7

Height (mm/inch)

330 / 13.0

Depth (mm/inch)

277 / 10.9

Interior volume (l/cu.ft.)

20 / 0.7

Racks, chrome-plated (number standard/max.)

2 / 3

Load per rack (kg/lbs.)

12 / 26

Permitted total load (kg/lbs.)

25 / 55

Weight of the unit (empty) (kg/lbs.)

22 / 49

Temperature data

 

Temperature range, 5°C (41°F) above ambient up to (°C / °F)

300 / 572

Temperature variation 1)

 

at 70 °C (± °C)

1,5

at 150 °C (± °C)

2,5

at 300 °C (± °C)

3,8

Temperature fluctuation (± °C) at 70°C

0.3

Heating up time 2)

 

to 70 °C (Min.)

13

to 150 °C (Min.)

24

to 250 °C (Min.)

35

Recov. time after door was opened for 30 sec. 2)

 

at 70 °C (Min.)

2.5

at 150 °C (Min.)

5

at 300 °C (Min.)

8

Air change data

 

Air change

 

at 70°C (x/h)

10

at 150°C (x/h)

13

at 300°C (x/h)

17

Electrical data

 

Housing protection acc. to EN 60529

IP 20

Nominal voltage (±10 %) 50 / 60 Hz (V)

230

Nominal power (kW)

0.8

Energy consumption

 

at 70 °C (158 °F) (W)

43

at 150 °C (302 °F) (W)

148

at 300 °C (572 °F) (W)

450

 

Accesories:


ED 23

 

Access port with silicone plugs, 10 mm (0.39 inch), 30 mm (1.18 inch), 50 mm (1.97inch)

O

Over temperature alarm, acoustic, can be switched off. Temperature limit can be set at the independent, adjustable temperature safety device class 2

O

Independent adjustable temperature safety device, Class 3.1 (DIN 12880)

O

Analog temperature output, 4 - 20 mA, with 6 - pin DIN socket (output not adjustable)

O

Temperature measurement acc. to DIN 12880 (27 measuring points) at 150 °C (302 °F) or at specified temperature with measuring protocol and certificate

O

Factory calibration certificate. Measurement in center of chamber at 150 °C (302 °F) or at specified testing temperature

O

Extension to factory calibration certificate. Each additional measurement at an additional measuring point or temperature

O

Rack, chrome - plated or stainless steel

O

Shelf, perforated, stainless steel

O

Lockable door

O

FKM door gasket

O

Door with window and interior lighting, 15 W (180 x 180 mm / 7.09 x 7.09 inch)

O


Additional Information

Brand Binder

Write Your Own Review

You're reviewing: ED 23 DRYING OVEN WITH NATURAL CONVECTION Cat No. 9010-0190 - Binder

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.